Electrical Characteristics

Electrical Characteristics
(V_CC = 3.0V to 3.6V and V_CC = 4.5V to 5.5V, T_A = T_MIN to T_MAX, unless otherwise specified. Typical values are at 5V and T_A = 25°C.) (Notes 1 and 2)
PARAMETER	SYMBOL	CONDITIONS		MIN	TYP	MAX	UNITS
POWER SUPPLY
Power Supply	V_CC			3.0		3.6	V
Power Supply	V_CC			4.5		5.5	V
Supply Current	I_CC	No load, no data, all channels enabled			9.0		mA
Shutdown Current	I_SHDN	All channels disabled			400		µA
RECEIVER
Common Mode Range	V_C_M			-25		+25	V
Differential Input Threshold	V_TH	Across common mode range		-200		+200	mV
Input Hysteresis	V_INHYS	Across common mode range			200		mV
Input Current (A_, B_)	I_IN	V_CC = 0V or 5.5V	V_IN = -25V			520	µA
Input Current (A_, B_)	I_IN	V_CC = 0V or 5.5V	V_IN = +25V			-520	µA
Enable Input Current (G, Ḡ, EN12, EN34)	I_INEN					±1	µA
Enable Input High Voltage (G, Ḡ, EN12, EN34)	V_IH			2			V
Enable Input Low Voltage (G, Ḡ, EN12, EN34)	V_IL					0.8	V
Output High Voltage	V_OH	V_ID = 200mV, I_SOURCE = 3mA, output enabled		V_CC – 0.4			V
Output Low Voltage	V_OL	V_ID = -200mV, I_SINK = 3mA, output enabled				0.4	V
Y_ Short Circuit Current	I_SC			-80		+80	mA
Input Resistance	R_IN			48			kΩ
PROTECTION
Thermal Shutdown Threshold	T_SHDN				+160		°C
Thermal Shutdown Hysteresis	T_HYST				12		°C
ESD Protection (A_, B_)		Human Body Model (JEDEC JS-001-2017)			±25		kV
		IEC 61000-4-2 Air Gap			±4
		IEC 61000-4-2 Contact Discharge			±4
ESD Protection (All Other Pins)		Human Body Model			±4		kV
ESD Protection (All Other Pins)		Charge Device Model			±4		kV
Fault Protection Range (A_, B_ Pins to GND)		A_, B_ independently or simultaneously		-65		+65	V
Fault Protection Range (A_, B_ Pins to GND)		A and B opposite polarity from separate supplies simultaneously		-65		+65	V
SWITCHING (MAX33076E, MAX33078E*)
Data Rate				20			Mbps
Propagation Delay	t_PLH, t_PHL					75	ns
Propagation-Delay Skew	t_SK					20	ns
Output Enable Time to Low Level	t_ZL					100	ns
Output Enable Time to High Level	t_ZH					2000	ns
Output Disable Time from Low Level	t_LZ					400	ns
Output Disable Time from High Level	t_HZ					400	ns
Time to Failsafe	t_FS				10		µs
SWITCHING (MAX33077E, MAX33079E)
Data Rate				35			Mbps
Propagation Delay	t_PLH, t_PHL					40	ns
Propagation-Delay Skew	t_SK					10	ns
Output Enable Time to Low Level	t_ZL					10	ns
Output Enable Time to High Level	t_ZH					2000	ns
Output Disable Time from Low Level	t_LZ					400	ns
Output Disable Time from High Level	t_HZ					400	ns
Time to Failsafe	t_FS				10		µs

Note 1:	All devices are 100% production tested at T_A = +25°C. Specifications over temperature are guaranteed by design.
Note 2:	All currents into the device are positive; all currents out of the device are negative. All voltages are referred to device ground, unless otherwise noted.

Timing Diagrams

Figure 1. Receiver VOH and VOL — Figure 1. Receiver V_OH and V_OL

Figure 3. Receiver Enable and Disable Times